Here is a photo taken just last Wednesday on The Diamond on Long’s Peak in Colorado’s Rocky Mountain National Park, by Martin Edwards. I think Martin’s own description captures it best, so I’ll let his words do the talking:
“I found this bail anchor above the North Chimney on the Longs Peak Diamond on Wednesday. There’s a lot going on: the flake that was slung was partially detached and not very solid, there is a buttonhead with an old SMC hangar, two rusted pins, and good stopper. There is webbing slung through everything with no equalization. There is no master point, either, everything converges at two different points. Jive ass.”
I couldn’t have said it better Martin, and I will only add the following two observations:
- The tan webbing is especially horrifying. Bolt hangers and pins often develop sharp edges, so it’s not a good idea to thread soft goods (like nylon webbing) through them. It’s best to attach them with a biner. Furthermore, nylon rubbing on nylon can melt at relatively low temperatures generated by force. So where the tan webbing is threaded through the bit of red webbing? Ouch!
- This whole anchor is a classic instance of what we climbers lovingly call a “clusterfuck”.
Be safe out there this summer, and happy climbing!
Location: Long’s Peak: The Diamond. Rocky Mountain National Park, Colorado, USA.